Installation - Sammic UX-40 User Manual

Ultra UX |

Installation

Reasonably foreseeable misuse
The use of this machine for degreasing and cleaning machined
parts is not permitted. Other professional uses of this machine,
such as for healthcare or chemical applications, are not permitted.
Limits of use
The machine must not be used in explosive atmospheres.
User qualifications
Installation qualification
The installation of this machine requires basic notions of plumbing
and basic professional training in electricity, electronics or mainte-
nance.
Qualification for operation and periodic maintenance
Operation of this machine requires basic training in the use of this
dishwasher.
This machine is not designed for use by people (including children)
with reduced physical, sensory or mental capacities or who lack the
necessary experience or knowledge unless they have received
supervision or instructions regarding the machine's use from a
person responsible for their safety.
Qualification for troubleshooting
Troubleshooting for this machine is allowed by Sammic-approved
service companies and technicians.
Hazards inherent to the product
• Risk of trapping with the door or dome:
⇒
W hen closing the door or dome, be careful not to get your
fingers caught in the frame or base.
⇒
[D ome models] When closing or opening the dome, take care
that your clothes do not get caught in the moving parts of
the lifting mechanism.
• R isk of slips and falls in the area around the dishwashing
machine: water splashing from the machine is common.
⇒
W hen walking near the machine, pay attention to the condi -
tion of the ground.
• A irborne noise :
– For a standard machine, the noise emitted by the machine is
69 dB(A) (distance 1 m).
– [ S models] The noise emitted by the machine is 65 dB(A) (distance
1 m).
Safety warnings in the manual
⚠ Wa r n ing
"Warning" safety warnings could result in severe, irreversible
personal injuries or death.
⚠ Ca ut io n
"Caution" safety warnings could result in severe, reversible per-
sonal injuries.
4
Other warnings in the manual
Notice
"Notice" warnings could result in damage to the machine.
ℹ Information
The tables of "Information" contain advice on how to use the
machine correctly and efficiently.
2 Installation
2.1 Supply scope
• D ocumentation:
– User manual.
– W arranty card and Declaration of Conformity.
– L ist of spare parts.
– E lectrical circuit diagram.
• M achine
• P ower supply cable
• D rain hose
2.2 Prerequisites and preparation for
installation
Tools and material required for installation
• I ncluded in the supply:
– Power supply cable
– D rain hose
• N ot included for mechanical assembly:
– Flat screwdriver
– N o. 10 box spanner
– U niversal pliers
– Cl amp
– P ressure gauge
• N ot included for electrical assembly:
– Power strip and/or European plug type "F" or three-phase plug
(depending on the installation)
– E lectrical tester
Space required for installation
ℹ Information
Figure with machine dimensions: see appendix at the end of the
manual.
• C heck that the water line is less than 1.50 m from the intended
location of the machine.
Electrical connections
Before installation, take note of the power input required by the
▶ 6
machine. [ Technical specifications p. 13 ].
User's manual — 2900455/0