Meritor ELSA 195 Maintenance Manual page 43

Reaction beam air disc brake

7 Guide Sleeve, Dust Excluder, Retainer and Bush

Fig. 68

Fig. 69

Fig. 70

Carefully slide the housing assembly into position on the guide

sleeves secured to the carrier Fig. 68

NOTE

: Take care not to damage the guide sleeve dust excluder

when locating the housing on to the carrier.

Locate the guide sleeve dust excluder beads in to the grooves on

the housing retainers Fig 69

Ensure the dust excluders are located correctly on both carrier

and housing retainers Fig 70

Slide the housing backwards and forwards several times to check

the smooth movement of the guide sleeves.

CAUTION

Take care not to trap fingers whilst checking the smooth

movement of the guide sleeves.

Using a copper faced mallet, carefully tap one of the new end

caps into the housing until it retains itself Fig 71

Using a suitable sized tool (socket) tap the end caps in until they

meet the dimensions shown in Figs 72 short guide sleeve & 73

long guide sleeve.

Fig. 71

ArvinMeritor Air Disc Brake ELSA 195

Table of Contents