Meritor ELSA 195 Maintenance Manual page 39

Reaction beam air disc brake

7 Guide Sleeve, Dust Excluder, Retainer and Bush

bronze bush

Fig. 53

Fig. 54

Fig. 55

NOTE

: If the short guide sleeve excluder retainer is undamaged

it is not necessary for it to be removed, as the oval bush must be

pushed out in the direction of the end cap (Fig 53).

If replacement is required, the retainer can be knocked out after

the bush has been removed - Fig 54.

NOTE

: Clean the guide sleeve bores with a suitable brake

cleaner or clear methylated spirits. Examine the condition of the

bores for wear corrosion or damage. If there is any doubt in the

suitability for further service replace with a new housing

assembly.

E - Fitting Guide Sleeve Oval Bush (16) –

Short Guide Sleeve

Align new oval bronze bush with markings on housing - Fig.55.

NOTE

: The bush must be assembled from the actuator side of

the housing.

Fit the ArvinMeritor Service Tool MBT 1000 and insert new bush

into the housing bore - Fig 56.

Using remaining parts of ArvinMeritor Service Tool MBT 1000.

Fig. 56

ArvinMeritor Air Disc Brake ELSA 195

Table of Contents