Meritor ELSA 195 Maintenance Manual page 38

Reaction beam air disc brake

7 Guide Sleeve, Dust Excluder, Retainer and Bush

Fig. 49

Fig. 50

Fig. 51

ArvinMeritor Air Disc Brake ELSA 195

C - Dismantling Guide Sleeve Round Bushes (14) –

Long Guide Sleeve

To remove the long guide sleeve round bushes. Using a suitable

arbor, press or drift out the bushes from the housing together with

the dust excluder retainer as shown in Fig 49

D - Dismantling Guide Sleeve "Oval" Bush (16) –

Short Guide Sleeve

NOTE

: Alignment of short guide sleeve oval bush in the housing.

Fig. 50. This is important for correct alignment of new bush when

fitting.

Tolerance for fitment is ±4°from the horizontal plane between the

2 guide sleeve bores. Fig. 50

Before pressing the bush out, check the alignment of the oval

bush and then mark the housing so that the new bush can be

correctly aligned before fitment. Fig.51

Using a suitable arbor, press or drift out the bush from the

housing - Fig 52.

Fig. 52

Table of Contents