Advertisement
5 Housing assembly replacement
Fig. 27
Fig. 28
Fig. 29
Apply grease to the guide sleeve and housing guide sleeve bores.
Fig. 27
NOTE
: Only use the grease supplied with the replacement
components/kits. Under no circumstance should any other type of
grease be used.
Carefully slide the housing assembly (18) into position on the
guide sleeves (24, 26) secured to the carrier (2) Fig. 28
Locate the guide sleeve dust excluders (12) onto the housing
retainers (13). Fig. 29
WARNING
Take care not to damage the guide sleeve dust excluder
when locating the Housing assembly on to the carrier.
Ensure the dust excluders are located correctly on both carrier
and housing retainers (13). Fig. 30
Slide the housing backwards and forwards several times to check
the smooth movement of the housing on the guide sleeves.
Using a copper faced mallet carefully tap one of the new end
caps (28) into the housing until it retains itself.
Fig. 30
ArvinMeritor Air Disc Brake ELSA 195
29
Advertisement
