Emerson Rosemount 3410 Series Maintenance And Troubleshooting Manual page 37

Maintenance and Troubleshooting Manual
00809-0600-3104
are not currently connected to the network, then Excel
access the printer driver information and MeterLink
reports or logs.
One solution is to install a local printer on your machine tied to LPT1. The local printer
driver you installed can be for any printer and the printer does not actually have to exist or
be connected to the PC. If you install a local printer, you can configure MeterLink to
temporarily change your Windows
MeterLink. Do this by selecting this local printer for the Override system default printer
selection in the Program Settings dialog. MeterLink will automatically change the
Windows
Windows
2.3.3 Maintenance logs or trend files are not created
When using Excel
Trend files are not created.
If the Inspection sheet of the Maintenance Log file or the Charts sheet of a Trend files are
not generated, it is probably because Excel
the Visual Basic
MeterLink to run the Visual Basic
To enable Excel
Procedure
1. Select Tools → Macros → Security menu path.
Rosemount Gas Ultrasonic Flow Meters
®
default printer to the selected override printer when it starts and will set the
®
default printer back to its original printer when it closes.
®
2007 or later, some of the worksheets in the Maintenance Logs or
®
script that generates the page. Excel
®
2007 to work with MeterLink,
®
Figure 2-6: Excel 2007 Tools menu
®
will most likely not be able to
™
cannot use Excel
®
default printer over to this local printer while running
®
is not configured to allow MeterLink to run
®
can be configured to allow
®
script by following the instructions below.
Troubleshooting
April 2022
®
to generate
37