Labels On The Product - R&S QAT100 User Manual

®
R&S QAT100
●
Only connect the product to a power source with a fuse protection of maximum
20 A.
●
Ensure that you can disconnect the product from the power source at any time.
Pull the power plug to disconnect the product. The power plug must be easily
accessible. If the product is integrated into a system that does not meet these
requirements, provide an easily accessible circuit breaker at the system level.
Cleaning the product
Use a dry, lint-free cloth to clean the product. When cleaning, keep in mind that the
casing is not waterproof. Do not use liquid cleaning agents.
Meaning of safety labels
Safety labels on the product warn against potential hazards.

1.2 Labels on the product

Labels on the casing inform about:
●
Personal safety, see
●
Product and environment safety, see
●
Device information is provided on a sticker attached to the radio (rear side). The
sticker contains a barcode and the device ID. The device ID is a combination of the
order number and the serial number.
Table 1-1: Labels regarding product and environment safety
User Manual 1179.3073.02 ─ 02
Potential hazard
Read the product documentation to avoid personal injury or product damage.
Electrical hazard
Indicates live parts. Risk of electric shock, fire, personal injury or even death.
Hot surface
Do not touch. Risk of skin burns. Risk of fire.
Protective conductor terminal
Connect this terminal to a grounded external conductor or to protective ground. This connec-
tion protects you against electric shock if an electric problem occurs.
"Meaning of safety labels"
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after the prod-
uct has come to the end of its service life. For more information, see
electronic equipment" on page 44.
Safety and regulatory information
on page 7
Table 1-1
Labels on the product
"Disposing electrical and
7