Ac Power; Usb 2.0 Port - R&S QAT100 User Manual

®
R&S QAT100
on the configuration, either all segments transmit signals or segments transmit signals
independent of each other. All segments always receive signals either way.
A = Segment A (Tx and Rx)
B = Segment B (Tx and Rx)
C = Segment C (Tx and Rx)
D = Segment D (Tx and Rx)
E = Segment E (Rx only)

4.2 AC power

Connector type: IEC 60320-1 C14
Connector label: "AC"
Function: AC input for a connection to the AC mains supply. You can connect the
antenna array to networks with different voltage levels (see datasheet for the suppor-
ted voltage range). The power supply automatically adapts itself to the voltage level of
the power source.
The power cord necessary to connect the panel to the power supply is part of the deliv-
ery (with country-specific plug).
For more information about using the AC power supply safely, see
power"
For more information about supplying the R&S QAT with power, see
"Connecting to
The AC power supply of the R&S QAT also holds a fuse. For instructions on how to
replace the fuse, see

4.3 USB 2.0 port

Connector type: Standard B
Connector label: "USB"
Function: USB 2.0 port for service applications.
User Manual 1179.3073.02 ─ 02
A B E C D
on page 6.
power", on page 13.
Chapter 11.1, "Changing
Instrument tour
D C E B A
"Connecting to
Chapter 3.6,
fuses", on page 43.
USB 2.0 port
17