Roscillator:extern; Roscillator:output; Rx_<Al>:Level:<Ch; Rx_<Al>:Select - R&S QAT100 User Manual

®
R&S QAT100
ROSCillator:EXTern <Frequency>
Selects an external reference frequency.
Parameters:
<Frequency>
Example:
ROSCillator:OUTPut <Frequency>
Selects the output reference frequency.
Parameters:
<Frequency>
Example:
RX_<al>:LEVel:<ch>?
Queries the receive level of the receive antennas.
Suffix:
<al>
<ch>
Return values:
<Level>
Example:
Usage:
RX_<al>:SELect?
RX_<al>:SELect:<ch> <Antenna>
Selects or queries the active receive antenna.
User Manual 1179.3073.02 ─ 02
10MHZ
10 MHz reference frequency
100MHZ
100 MHz reference frequency
3200MHZ
3.2 GHz reference frequency
//Select external reference
ROSC:EXT 10MHZ
10MHZ
Select 10 MHz reference
100MHZ
Select 100 MHz reference
//Select output reference
ROSC:OUTP 10MHZ
.
A | B
Antenna line (A = upper line, B = optional lower line)
A | B | C | D | E
Receive antenna
Default unit: PCT
//Query receive level of Rx antenna B in line A
RX_A:LEV:B?
Query only
Remote control
Remote control commands
39