Ant:rx_<Al>:On; Ant:tx_<Al>:Off; Roscillator:intern - R&S QAT100 User Manual

®
R&S QAT100
Parameters:
<Antenna>
Example:
ANT:RX_<al>:ON
ANT:TX_<al>:OFF
Turns all receive antennas on or off.
Suffix:
<al>
Parameters:
<Antenna>
Example:
Usage:
ANT:TX_<al>:SWITch <Antenna>
Turns on a single transmit antenna and simultenously turns off all other transmit anten-
nas.
Suffix:
<al>
Parameters:
<Antenna>
Example:

ROSCillator:INTern

Selects the internal reference frequency.
Example:
Usage:
User Manual 1179.3073.02 ─ 02
Range: 0 to 95
//Configure transmit antennas in line A
ANT:TX_A:ON 12
ANT:TX_A:ON 24
ANT:TX_A:OFF 6
ANT:TX_A:OFF 18
.
A | B
Antenna line (A = upper line, B = optional lower line)
Range: 0 to 95
//Turn on all receive antenna in line A
ANT:RX_A:ON
Event
.
A | B
Antenna line (A = upper line, B = optional lower line)
Range: 0 to 95
//Turn on transmit antenna 24 in line A
ANT:TX_A:SWIT 24
//Select internal reference
ROSC:INT
Event
Remote control
Remote control commands
38