Remote Control Commands; Common Commands - R&S QAT100 User Manual

®
R&S QAT100

8.2 Remote control commands

● Common
● Network
● System
● Instrument

8.2.1 Common commands

*IDN?
*OPT
*RST
*SERial
*IDN?
Returns the instrument identification.
Return values:
<ID>
Example:
Usage:
*OPT
Queries the options included in the instrument. For a list of all available options and
their description, refer to the data sheet.
Return values:
<Options>
*RST
Sets the instrument to a defined default status. The default settings are indicated in the
description of commands.
Usage:
*SERial
Returns the serial number of the R&S QAT
Return values:
<SerialNo>
User Manual 1179.3073.02 ─ 02
commands............................................................................................... 33
configuration............................................................................................. 34
configuration...............................................................................................36
configuration..........................................................................................37
..............................................................................................................................33
.............................................................................................................................. 33
...............................................................................................................................33
........................................................................................................................... 33
"Rohde&Schwarz,<device type>,<serial number>,<firmware ver-
sion><CR><LF>"
Rohde&Schwarz,QAT-100,123456,1.00>CR><LF>
Query only
The query returns a list of options. The options are returned at
fixed positions in a comma-separated string. A zero is returned
for options that are not installed.
Event
Remote control
Remote control commands
33