Lan Interface; Trigger Input & Output; Reference Input; Reference Output - R&S QAT100 User Manual

®
R&S QAT100

4.4 LAN interface

Connector type: RJ45
Connector label: "LAN"
Function: LAN interface to connect the R&S QAT to a network.
4.5 Trigger input & output
Connector type: BNC connector
Connector label: "Trg In" / "Trg Out"
Reserved for future use.

4.6 Reference input

Connector type: SMA
Connector label: "Ref In"
Function: Input for an external frequency reference (10 MHz, 100 MHz or 3.2 GHz).

4.7 Reference output

Connector type: BNC connector
Connector label: "Ref Out"
Function: Output for a frequency reference (10 MHz or 100 MHz).

4.8 Display and control elements

The user interface is displayed in an OLED display.
You can navigate the user interface with various control elements.
●
"Preset": Presets the R&S QAT to its default configuration.
●
"Esc": Exits a menu in the interface.
●
"Enter": Confirms a selection.
●
"Del": Deletes an entry.
●
Cursor keys: Navigate through the user interface.
For an overview of all settings available in the user interface, see
reference",
User Manual 1179.3073.02 ─ 02
on page 30.
Instrument tour
Display and control elements
Chapter 7, "Function
18