R&S QAT100 User Manual page 22

®
R&S QAT100
Figure 5-4: Top view of the R&S QAT
●
R&S QAT with one or two antenna array lines:
Simulate up to 8 objects by using each antenna segment for one object.
Figure 5-5: Top view of the R&S QAT
●
Several R&S QAT with one or two antenna array lines:
Simulate more than 8 objects by using each antenna segment for one object.
Depending on the number of transmit antennas you want to use, this setup
requires more than one radar echo generator, because each R&S AREG800A sup-
ports up to eight independent IF paths.
User Manual 1179.3073.02 ─ 02
R&S QAT rear panel
Radar object
R&S QAT rear panel
Radar objects
Simulating radar objects
22