®
R&S
QAT100
SET:LAN:HOST:NAMe <HostName>
SHOW:LAN:HOST:NAME?
Defines or queries the host name of the R&S QAT.
Parameters:
<HostName>
Example:
Usage:
SET:LAN:INIT
Activates the LAN configuration of the R&S QAT
Example:
Usage:
SET:LAN:IP <IPAddress>
SHOW:LAN:IP?
Defines or queries the IP address of the R&S QAT.
Prerequisites for this command
●
Turn off DHCP (SHOW:LAN:DHCP?).
Return values:
<IPAddress>
Example:
Usage:
SHOW:LAN:MAC:ADDRess??
Queries the MAC address of the R&S QAT.
Return values:
<MACAddress>
Example:
User Manual 1179.3073.02 ─ 02
String that contains the hostname.
The default host name is QAT100<SerialNumber>
//Set and query host name
SET:LAN:HOST:NAME 'QATHostName'
SHOW:LAN:HOST:NAME?
Query only
See
SHOW:LAN:IP?
Event
IP address in the format 000.000.000.000.
//Configure network properties
Show:LAN:MAC:ADDR?
SET:LAN:DHCP?
SET:LAN:DHCP:OFF
SET:LAN:GW 192.0.2.0
SET:LAN:SNM 255.255.0.0
SET:LAN:IP 192.0.2.0
SET:LAN:INIT
WRITE:MXINI
Query only
See
SHOW:LAN:IP?
Remote control
Remote control commands
35