R&S QAT100 User Manual page 27

®
R&S QAT100
4. Screw the shielding system to the R&S QAT using the screws from the handles
and a Torx screwdriver (4 screws, size 20).
Figure 5-9: Attaching the shielding system
When setting up the R&S QAT with the shielding system, make sure that there is
no empty space between the shielding system and the DUT to protect other devi-
ces from interfering radar signals.
Figure 5-10: Distance between shielding system and DUT
d
d
User Manual 1179.3073.02 ─ 02
d
1
= Position OK: DUT directly in front of shielding system
1
= Position not OK: DUT too far from shielding system
2
Simulating radar objects
d
2
27