System Configuration; Write:mxini; Ant:tx_<Al>:On; Ant:tx_<Al>:Off - R&S QAT100 User Manual

®
R&S QAT100
Usage:

WRITe:MXINi

Writes the LAN settings to the non-volatile memory of the R&S QAT and are therefore
kept after a restart of the R&S QAT.
Example:
Usage:

8.2.3 System configuration

HANDshake?
HANDshake:ON
HANDshake:OFF
SYSTem:CLEar
SYSTem:ERRor?
HANDshake?
Queries the state of the handshake function.
Return values:
State
Example:
Usage:
HANDshake:ON
HANDshake:OFF
Turns the handshake function on and off.
If on, a successful execution of a command that has no query is confirmed by a corre-
sponding message.
Example:
Example:
User Manual 1179.3073.02 ─ 02
Query only
See
SHOW:LAN:IP?
Event
...................................................................................................................36
...............................................................................................................36
............................................................................................................. 36
................................................................................................................37
............................................................................................................. 37
ON | OFF | 1 | 0
//Turn on handshake function and query state
HAND:ON
HAND?
Query only
//Turn on handshake
HAND:ON
//Select transmit antenna
ANT:TX_A:ON 12
would return:
"TX_A 12 ON"<CR><LF>
//Turn off handshake
HAND:OFF
//Select transmit antenna
ANT:TX_A:ON 12
would return nothing
Remote control
Remote control commands
36