Changing Network (DICOM) configuration
Topics:
•
Changing the printer AE-title
•
Changing the hostname
•
Changing the domain name
•
Changing the printer IP address
•
Changing the netmask
•
Changing the router IP address
•
Removing a modality
•
Adding a modality
Changing the printer AE-title
1. On the Change settings menu, press the Down key three times, followed by
the Confirm key to select 'Network (DICOM)'.
The 'Network (DICOM)' screen is displayed:
5 Netmask
6 Router IP-address
7 Remove modality
8 Add modality
2. Press the Confirm key to select 'Printer AE-title'.
The 'Printer AE-title' screen is displayed:
If the printer AE-title has already been assigned, it will be shown on the
display.
3. Change the printer AE-title by means of the arrow keys. The printer AE-
title is limited to 16 characters.
4. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
Data entry
on page 12
DRY 1.4, DRY 2.4 | Advanced Operation (key-operator mode) | 29
Note: Entries are case sensitive.
on page 23
3630B EN 20210520 0952