100 | DRY 1.4, DRY 2.4 | System Description
Network configuration
The printer supports standard network. This means that you can just plug it
into the (existing) ethernet network without any additional options or
accessories. The printer is also a native DICOM printer. Therefore the
standard DICOM protocol can be used as network protocol, and again without
any additional options or accessories the printer will be able to process and
print the DICOM jobs.
In this network configuration the printer is of course fully compatible with
imaging system components, including CR digitizers, CR workstations, image
buffer components and PACS systems.
Figure 1: Example of the printer in a network configuration
Figure 2: Example of a printer in a point-to-point configuration
* Paxport is required if the modality is not a DICOM modality.
3630B EN 20210520 0952
Printer
Acquisition Workstation
Printer