Changing the site-specific data (via remote browser only)
The following site-specific data are stored in the printer memory:
Field
Site name
Site address (contact)
City
Tel. country code
Tel. number
Modem
Department
Contact person
Delivery address
E-mail address
Modem tel. number
Comment
Some of these data fields are mandatory (see table above). When they are not
present, the following screen is displayed when you enter the Key-operator
mode:
You can only change the site-specific data via the remote browser interface.
Related Links
Controlling the printer via a remote PC (with browser)
DRY 1.4, DRY 2.4 | Advanced Operation (key-operator mode) | 27
Mandatory
x
x
x
x
x
x
x
x
on page 80
3630B EN 20210520 0952