AGFA DRY 1.4 Reference Manual page 75

DRY 1.4, DRY 2.4 | Advanced Operation (key-operator mode) | 75
Note: Note that blank spaces will be ignored (see examples
below).
Example: if the netmask is 250.250.250.0, then the data entry should be
as follows:
250.250.250. 0
6. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Router IP address' screen is displayed:
If the Router IP address has already been assigned, it will be shown on the
120.120.120.120
display.
7. Enter the Router IP address by means of the arrow keys.
Note: Note that blank spaces will be ignored (see examples
below).
Example 1: if the IP address is 120.000.120.120, then the data entry
should be as follows:
120.000.120.120
Example 2: if the IP address is 120.0.120.120, then the data entry should
be as follows:
8. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Printer AE-title' screen is displayed:
If the Printer AE-title has already been assigned, it will be shown on the
display.
9. Change the Printer AE-title by means of the arrow keys. The Printer AE-
title is limited to 16 characters.
3630B EN 20210520 0952