Table of Contents
Advertisement
24 | DRY 1.4, DRY 2.4 | Advanced Operation (key-operator mode)
8. Do one of the following:
• If you want to save the configuration on the back-up USB flash drive,
• If you only want to save the configuration on the internal media, press
9. Depending on the settings that has been changed, you go directly to the
Keyoperator main menu are via the following intermediate screen:
Press the Confirm key to reset the printer or press the Escape key to reset
later. After the reset, the new settings will be active.
Related Links
Using the installation wizard
General save configuration procedure
3630B EN 20210520 0952
press the Confirm key (YES). The printer will now enter the 'General
save configuration procedure'.
the Escape key (NO) and proceed with step 9.
on page 72
on page 50
Advertisement
Table of Contents
