Table of Contents
Advertisement
WARNING:
The print head unit can be warm.
4. Gently remove the film sheet(s).
Note: Never use force to clear the jammed film. If it is not
possible to gently remove the jammed film by pressing the
transport buttons, proceed with the procedure as follows.
Note: Verify that no film sheets remain in the print head
compartment.
5. If the film jam has been cleared, close the printer. You can resume work.
DRY 1.4, DRY 2.4 | Problem solving | 113
3630B EN 20210520 0952
Advertisement
Table of Contents
