About this guide
This guide describes the SmartNode 200 hardware, installation and basic configuration. For detailed software
configuration information refer to the
Notes.
Audience
This guide is intended for the following users:
Operators
•
•
Installers
Maintenance technicians
•
Structure
This guide contains the following chapters and appendices:
Chapter
1, starting on page 13, contains what you need to quickly start using the SN200.
•
•
Chapter
2, starting on page 15, provides information about SmartNode device features and capabilities
•
Chapter
3, starting on page 21, contains an overview describing SmartNode device operation and applica-
tions
Chapter
4, starting on page 24, provides SmartNode device installation procedures
•
Chapter
5, starting on page 30, leads you through the steps to set up a new SmartNode device and down-
•
load a configuration
Chapter
6, starting on page 35, contains information on contacting Patton technical support for assistance
•
Appendix
A, starting on page 38, provides compliance info for the SmartNode device
•
Appendix
B, starting on page 40, contains specifications for the SmartNode device
•
•
Appendix
C, starting on page 44, provides cable recommendations
•
Appendix
D, starting on page 48, describes the SmartNode device's ports and pin-outs
•
Appendix
E, starting on page 51, describes how to obtain factory configuration settings for the SmartNode
device
Appendix
F, starting on page 53, describes the Reset button functions
•
Appendix
G, starting on page 58, provides the End User License Agreement
•
For best results, read the contents of this guide before you install the SmartNode device.
Precautions
Notes and cautions, which have the following meanings, are used throughout this guide to help you become
aware of potential SmartNode device problems. Warnings relate to personal injury issues, and Cautions refer to
potential property damage.
Trinity Command Line Reference Guide
and the available Configuration
9