Introduction; Sn200 Reset Button - Patton SmartNode SN200 User Manual

SmartNode 200 User Manual

Introduction

The Reset button (see figure
Reboot the SmartNode device (see section
•
Power LED is lit" on page 55)
• Erase the startup-config settings, which is followed by a SmartNode device reboot as indicated by the slow
blinking of all LEDs (see section
is lit" on page 55)
Factory reset, which is followed by a device reboot as indicated by the fast blinking of all LEDs (see section
•
"Resetting the SmartNode device when it is operating and the Power LED is lit"
Introduction
16) is used to do the following:
"Resetting the SmartNode device when it is operating and the
"Resetting the SmartNode device when it is operating and the Power LED
Figure 16. SN200 Reset button
F • Reset Button Functions
on page 55)
54