Table of Contents
Advertisement
SmartNode 200 User Manual
IP addresses and/or URL of SIP servers or Internet telephony services (if used)
•
•
Login and Password for SIP based telephony services
IP addresses of central TFTP server used for configuration upload and download (optional)
•
Software tools
You will need a PC (or equivalent) with Windows Telnet or a program such as Tera Term Pro or Putty to con-
figure the software on your SmartNode device. Also you may use your web browser to configure the unit. The
WebWizard in this case reduces time to get your unit up and running. See more details on
wizard.
Power source
If you suspect that your AC power is not reliable, for example if room lights flicker often or there is machinery
with large motors nearby, have a qualified professional test the power. Patton recommends that you include an
uninterruptible power supply (UPS) in the installation to ensure that VoIP service is not impaired if the power
fails.
Installing the SmartNode device
SmartNode device installation consists of the following:
Placing the device at the desired installation location (see
•
Installing cables (see
•
•
Installing the power supply (see
When you finish installing the SmartNode device, go to Chapter 5,
Placing the SmartNode device
Place the SmartNode device on a desktop or similar sturdy, flat surface. Allow sufficient space at the rear of the
chassis for cable connections. Additionally, you should consider the need to access the unit for future upgrades
and maintenance.
To prevent overheating and damaging the unit, proper ventilation is required when
placing the device; leave at least 2 inches (5 cm) to the left, right, front, and rear of
the SmartNode device.
CAUTION
The device should be installed in a dry environment with sufficient space to allow air
circulation for cooling. Do not stack multiple SmartNode devices directly on top of
one another, and do not place items on top of the device. If you will be installing
equipment above the SmartNode device, leave at least 2 inches (5 cm) of clearance
between the devices.
Installing the SmartNode device
page
27)
page
28)
page
26)
"Initial Configuration"
4 • SmartNode Installation
www.patton.com/
on page 30.
26
Hide quick links:
Advertisement
Table of Contents
