SmartNode 200 User Manual
SN200 front panel LED and button definitions
figure 3
shows SN200 LEDs and the Reset button; the definitions are listed in
If an error occurs, all LEDs will flash for more than 5 seconds until the device
Note
reboots.
LED/Button
Power LED
LAN LED
ETH 0 (SN200/1JS1V/EUI)
SmartNode 200 overview
Figure 3. SN200 front panels
Table 2. SN200 LED and Button Definitions
•
When lit, indicates power is applied.
•
When lit, indicates the Ethernet connection has a link indica-
tion.
•
Flashes when data is received or transmitted at the Ethernet
port.
2 • General information
table 2.
Description
19