Voice Connectivity; Data Connectivity; Voice Processing (Signaling Dependent) - Patton SmartNode SN200 User Manual

SmartNode 200 User Manual
Refer to the
Note

Voice Connectivity

1, 2 or 4 FXS ports, RJ-11/12
or
1 FXS port and 1 FXO port, RJ-11/12
2-wire Loopstart
EuroPOTS (ETSI EG201188)
Programmable AC impedance, feeding, ring and onhook voltage
Caller-ID FSK and ITU V.23/Bell 202 generation
5 REN load on FXS port

Data Connectivity

One 10/100Base-TX Ethernet port
All ports full duplex, auto-sensing, auto-MDX

Voice Processing (signaling dependent)

Full-duplex channels with voice codecs:
G.711 a-law & u-law
•
G.722-64k
•
• G.726 (16, 24, 32 Kbps)
G.729ab (8 kbps)
•
G.168-2004 echo cancellation (64 ms)
Up to 4 simultaneous low bandwidth, high definition voice or T.38 fax calls
DTMF detection and generation
Silence suppression and comfort noise
Adaptive and configurable dejitter buffer
Configurable RTP packet length
Configurable tones (dial, ringing, busy, etc.)
RTP/RTCP (RFC 1889)
SRTP (RFC 3711)

Voice Connectivity

software feature matrix for the most up-to-date specifications.
B • Specifications
41