Safety When Working With Electricity - Patton SmartNode SN200 User Manual

SmartNode 200 User Manual
Note
The alert symbol and IMPORTANT heading calls attention to important information.
IMPORTANT
The shock hazard symbol and WARNING heading indicate a potential electric
shock hazard. Strictly follow the warning instructions to avoid injury caused by
electric shock.
WARNING
The alert symbol and WARNING heading indicate a potential safety hazard.
Strictly follow the warning instructions to avoid personal injury.
WARNING
The shock hazard symbol and CAUTION heading indicate a potential electric shock haz-
ard. Strictly follow the instructions to avoid property damage caused by electric shock.
CAUTION
The alert symbol and CAUTION heading indicate a potential hazard. Strictly follow the
instructions to avoid property damage.
CAUTION

Safety when working with electricity

The SmartNode device contains no user serviceable parts, and is not be opened
by the user. The equipment shall be returned to Patton Electronics for repairs or
repaired by qualified service personnel.
WARNING
Mains Voltage: In systems without a power switch, line voltages are present in the
power supply when the power cord is connected. The mains outlet used to power
the SmartNode device shall be within 10 feet (3 meters) of the device, be easily
WARNING
accessible, and protected by a circuit breaker.
For AC powered units, ensure that the power cable used meets all applicable stan-
dards for the country in which it is to be installed, and that it is connected to a wall
outlet which has earth ground.
WARNING
For units with an external power adapter, the adapter shall be a listed Limited
Power Source.
WARNING
Highlights a helpful tip to help the user work more efficiently.
10