Some Guidelines; Select Document Type; Automatic Document Size Detection - Muratec MFX-2530 Operating Instructions Manual

Some guidelines

Select document type

You can select the two document types by pressing
– Select this mode when copying documents contain-
PHOTO
ing photographs or drawings with letters.
/ – Select this mode when copying photographs or
PHOTO TEXT
drawings.
– This mode automatically selects the suitable setting
AUTO
according to the document type.
Note: If you want to make only the light areas, such as the text written with pen-
cil, darken selectively, assign DocEnhance to a Soft Key and turn it on.
(See page 4.1.)
Note: You can change the document type priority. See page 2.27.)
Adjust image contrast
You can adjust the copy image contrast to match your document by pressing
.
CONTRAST
– Darkens weak, "washed-out" images.
DARK
= – Provides some darkening of documents.
– Suited to most documents.
NORMAL
= – Provides some lightening of documents.
– Lightens up overly dark documents.
LIGHT
– This mode automatically sets the suitable setting
AUTO
according to the document density.
Note: You can change the image contrast priority. (See page 2.27.)
.
DOCUMENT

Automatic document size detection

Your machine can automatically detect the following size of your document and
select a suitable sized paper to copy your document.
• Letter (8.5 11 )
• Legal (8.5 14 )
• Ledger (11 17 )
• Half-letter (5.5 8.5 )
Note: Half-letter is available only with the
If the suitable sized paper is not set in the paper cassette, the
Copy Ready
Set 1
Ppr. LTR 100%
If you want to copy with the paper the machine auto-
No paper size
matically selected, press
is suitable.
Copying with auto
If you want to copy with other size paper, press
selected paper.
to cancel this operation, then set the suitable paper in
Copy : START
Cancel : STOP
the cassette and adjust the Reduce/Enlarge ratio.
Paper Zoom Sort
If you set the non-standard sized document or the machine could not detect the doc-
ument size, the shows:
LCD
Copy Ready
Set
1
100%
Ppr. LTR
If you want to copy with the paper that the machine
Auto doc. size
automatically selected, press
detection failed.
Copy : START
If you want to copy with other sized paper, press
Cancel : STOP
to cancel this operation, then set the suitable paper in
the cassette and adjust the Reduce/Enlarge ratio.
Paper Zoom Sort
Manual paper select
You can select the paper manually by pressing [Paper] or using the cursor key.
Note: If the optional multi-paper tray is attached, you can select the multi paper
tray, see "Using the bypass tray" on page 2.7.
Basic copy
.
FBS
shows:
LCD
.
START
STOP
.
START
STOP
2.1