Muratec MFX-2530 Operating Instructions Manual page 29

3
Shake the new drum cartridge hori-
zontally.
4
Align the green labels on both ends of
the new drum cartridge with the
green labels on the rails of the
machine and set it to the machine.
5
Grasp the handles and push the drum
cartridge into the machine until it clicks.
6
Close the printer cover.
Installing / changing the toner bottle
Note: Use ONLY the specified toner for this machine. Using any other toner could
result in damage.
Note: Be careful not to drop the toner bottle from 1 m (about 40 inches) or more
height. It may cause damage to the toner bottle.
1
Open the toner bottle cover.
2
Gently pull out the used bottle.
Note: If the toner bottle cover is opened
while the bottle is turning, the
bottle may be locked in place. If
this happens, close the cover, wait
for the bottle to stop, and try
again.
3
Sharply tap the new toner bottle against a
desk or other hard surface four or five
times. Then turn the toner bottle upside
down and tap it the same way again.
Getting started
1.13