Muratec MFX-2530 Operating Instructions Manual page 151

Setting the speed for Macros
You can adjust the speed of one step in the Macro key.
1
Press , , [Setting].
MACRO PROGRAM NEXT
2
Select desired speed for Macros using the cur-
sor key.
3
Press [Enter] to save the setting.
Copying or fax dialing with the Macro key
To copy or dial a fax call using a Macro key:
1
Insert the document.
2
Select resolution and contrast.
3
Press the Macro key in which you've stored the command.
Note: You can also select the command from the Macro key list:
Press . Select the command using the cursor key.
MACRO PROGRAM
Then press [Action].
4
Press , if you have not registered
START
5
The programmed command will start.
Macros
Use cursor to select
Macro speed.
Very Fast
Fast
Normal
Slow
Enter
in the Macro key.
START
Common settings
4.5