Peripheral Setup; A Short Description Of This Screen's Items Follows - DIGITAL-LOGIC MICROSPACE PCC-P5 Technical User's Manual

DIGITAL-LOGIC AG

Peripheral Setup

15.7
1. Press <ENTER> on "PCI/PLUG and PLAY Setup" and the screen as below will display.
AMIBIOS SETUP – PERIPHERAL SETUP
(C) 1996 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
OnBoard Serial Port1
OnBoard Serial Port2
OnBoard Parallel port
Parallel Mode
OnBoard IDE
2. Use <↑> and <↓> to choose the item. Use <PgUp> and
<PgDn> keys to modify the highlighted item.
3. After you have finished with PCI/Plug and Play Setup, press <Esc> to return to the main menu
screen.

15.7.1 A short description of this screen's items follows:

OnBoard FDC
OnBoard Serial Port1
OnBoard Serial Port2
OnBoard Parallel Port
Parallel Port Mode
OnBoard IDE
Auto Available Options:
Auto Auto
Auto Disabled
Auto Enabled
ECP
Primary
ESC:Exit
PgUp/PgDn:Modify
F2/F3 : Color
This option enables the FDC (Floppy Drive Controller) on the motherboard.
The settings are Auto (AMIBIOS automatically determines if the floppy
conrtoller should be enabled), Enabled or Disabled.
This option specifies the base I/O port address of serial port 1. The settings
are Auto (AMIBIOS automatically determines the correct base I/O address),
Disabled, 3F8h, 2F8h, 2E8h or 3E8h.
This option specifies the base I/O port address of serial port 1. The settings
are Auto (AMIBIOS automatically determines the correct base I/O address),
Disabled, 3F8h, 2F8h, 2E8h or 3E8h.
This option specifies the base I/O port address of the parallel port on the
motherboard. The settings are Auto (AMIBIOS automatically determines the
correct base I/O port address), Disabled, 378h, 278h or 3BCh.
This option specifies the parallel port mode. The settings are Normal, EPP or
ECP.
This option specifies the channel used by the IDE conrtoller on the board.
The settings are Disabled, Primary, Secondary or Both.
146
↑ ↓
:Sel
PCCP5 Manual V2.3