Table of Contents
Advertisement
DIGITAL-LOGIC AG
PCCP5 Manual V2.3
11.3.2 Driver for WIN 95
After installing the MSMM104 card, Win95 will recognize the new hardware by displaying a dialog box
„New Hardware Found AD1816". Insert DRIVER DISK WIN95 into the floppydisk A:. Select the option
„Driver from disk provided by hardware manufacturer", and hit ENTER. In the next windows select the default
driver and hit OK. Select the default driver also for the GAMEPORT. The DRIVER DISK WIN95 must be in
the floppy drive and the correct drivers are loaded. Remove the disk and restart the system when prompted.
Your soundcard is now active.
11.3.3 Driver for NT4.0
After installing the MSMM104 card, NT will recognize the new hardware by displaying a dialog box saying
„New Hardware Found AD1816". Insert DRIVER DISK NT4.0 into the floppydisk A:. Select the option
„Driver from disk provided by hardware manufacturer", and hit ENTER. On the next windows select the de-
fault driver and hit OK. Select the default driver also for the GAMEPORT. The DRIVER DISK NT must be in
the floppy drive and the correct drivers are loaded. Remove the disk and restart the system when prompted.
Your soundcard is now active.
11.3.4 Bundled Applications, MediaRack
Insert the Disk witch contains all the bundled and optional applications.
Run a:\setup.exe (for Win 3.11, Win95, NT4.0).
The installer will create a program group called „bundled applications" and „optional applications".
Included applications:
• MEDIA RACK
• MEDIA LAUNCHER
• WAVE SHAPER
• DOC TALKER TTS and NOTE TALKER TTS
• KARAOKE PRODUCER
• PRESTO ARRANGER
128
Advertisement
Table of Contents
