Power Management Setup; A Short Description Of This Screen's Items Follows - DIGITAL-LOGIC MICROSPACE PCC-P5 Technical User's Manual

DIGITAL-LOGIC AG

Power Management Setup

15.5
1. Press <ENTER> on "Power Management Setup" of MAIN MENU SCREEN and the screen
(as below) will display.
AMIBIOS SETUP - POWER MANAGEMENT SETUP
(C)1996 American Megatrends, Inc. All Rights Reserved
Power Management/APM
Instant-On Timeout (Minute)
Green PC Monitor Power State
Video Power Down Mode
Hard Disk Power Down Mode
Hard Disk Time Out (Minute)
Standby Time Out (Minute)
Suspend Time Out (Minute)
Slow Clock Ratio
IRQ3 Active (at suspend)
IRQ4 Active (at suspend)
IRQ5 Active (at suspend)
IRQ7 Active (at suspend)
IRQ8 Active (at suspend)
IRQ9 Active (at suspend)
IRQ10 Active (at suspend)
IRQ11 Active (at suspend)
IRQ12 Active (at suspend)
IRQ13 Active (at suspend)
IRQ14 Active (at suspend)
2. Use <↑> and <↓> to choose the item. Use <PgUp> and
<PgDn> keys to modify the highlighted item.
3. After you have fi nished with Power Management Setup, press <Esc> to return to the main menu
screen.

15.5.1 A short description of this screen's items follows:

Power Management/APM
Instant-On
Timeout (Minute)
Green PC Monitor Power
State
Video Power Down Mode
Hard Disk Power
Down Mode
Hard Disk Time Out
(Minutes)
Disabled Available Options:
Disabled
Standby
Standby
Suspend
Disabled
1
1
1:8
Ignore
Ignore
Ignore
Ignore
Ignore
Ignore
Ignore
Ignore
Both
Ignore
Monitor
Set this option to Enable to enable the Intel Chipset power management
features and APM (Advanced Power Management). The settings are En-
abled, Disabled or Inst-ON.
Set this option to Enabled to enable the AMIBIOS support for the Intel In-
stantOn feature. The settings are Disabled or 1-15.
This option specify the power state that the green PC-compliant video
monitor enters when AMIBIOS places it in a power savings state after the
specified period of display inactivity has expired. The settings are Off,
Standby, Suspend or Disabled.
This option specifies the power conserving state that the VESA VGA video
subsystem enters after the specified period of display inactivity has expired.
the settings are Disabled, Standby or Suspend.
This option specifies the power conserving state that the hard disk drive
enters after the specified period of hard drive inactivity has expired. the set-
tings are Disabled, Standby or Suspend.
This option specifies the length of a period of hard disk drive inactivity.
When this length of time expires, the computer enters power-conserving
Disable
Enabled
Inst-ON
ESC:Exit ↑↓:SEL
PgUp/PgDn:Modify
F2/F3 : Color
142
PCCP5 Manual V2.3