DIGITAL-LOGIC AG
7.4 The COM 1/2 Serial Interface Cable
DT terminal for dual row 0.1" (2.54 mm grid) and 1.27 mm flat cable
C O M 1 / 2
ATTENTION:
-
Do not short-circuit these signal lines.
-
Never connect any pins either to the same plug or to any other plug on the MICROSPACE
PCC-P5. The +/-10Volt will destroy the MICROSPACE core logic immediately. No warranty in this
case!
-
Do not overload the output: max. output current of Maxim converters: 10 mA
-
The maximum supply current for the mouse is ~ 5mA!
Line of pin 1
1
2
9
10
112
PCCP5 Manual V2.3
1
6
2
COM1
7
9pin D-Sub
3
8
male
4
9
5