Advanced Cmos Setup; A Short Description Of This Screen's Items Follows - DIGITAL-LOGIC MICROSPACE PCC-P5 Technical User's Manual

DIGITAL-LOGIC AG

15.3 Advanced CMOS Setup

1. Press <ENTER> on "Advanced CMOS Setup" of MAIN MENU SCREEN and the screen as
below will display.
AMIBIOS SETUP - ADVANCED CMOS SETUP
(C)1996 American Megatrends, Inc. All Rights Reserved
Quick Boot
st
1 Boot Device
nd
2 Boot Device
rd
3 Boot Device
th
4 Boot Device
Try Other Boot Devices
S.M.A.R.T. for Hard Disks Disabled
BootUp Num-lock
PS/2 Mouse Support
Typematic Rate
System Keyboard
Primary Display
Password Check
Parity Check
Wait for 'F1' If Error
Hit 'DEL' Message Display Enabled
Internal Cache
External Cache
System BIOS Cacheable
C000,16k Shadow
2. Use <↑> and <↓> to choose the item. Use <PgUp> and
<PgDn> keys to modify the highlighted item.
3. After you have finished with Advanced CMOS Setup, press <Esc> to return to the main menu
screen.

15.3.1 A short description of this screen's items follows:

Quick Boot
st
1 Boot Device
nd th
2 -4 Boot Device
Try Other Boot Devices
S.M.A.R.T. for Hard Disks
BootUp Num-lock
PS/2 Mouse Support
Enabled Available Options:
Floppy Disabled
IDE-0 Enabled
Disabled
Disabled
Yes
On
Enabled
Fast
Present
VGA/EGA
Setup
Disabled
Disabled
Writeback
Disabled
Enabled
ESC: Exit
Enabled
PgUp/PgDn: Modify
F2/F3 : Color
Set this option to Enabled to permit the AMIBIOS to boot within 5 sec-
onds. This option replaces the old Above 1 MB Memory Test option.
This option sets the sequence of boot drives that AMIBIOS attempts to boot
from after AMIBIOS POST completes. The settings are IDE-0 – IDE-3,
FLOPPY, FLOPTICAL, CDROM, SCSI, NETWORK, Disabled.
These options sets the sequence of boot drives after the first device. The
settings are FLOPPY, FLOPTICAL, CDROM, Disabled.
Set this option to Yes to instruct AMIBIOS to attempt to boot from any other
drive in the system if it cannot find a boot drive among the drives specified in
st
the 1 Boot Device, 2
vice options. The settings are Yes or No.
Set this option to Enable to permit the AMIBIOS to use the SMART (Self
Monitoring Analysis and Reporting Technology) protocol for reporting server
system information over a network. The settings are Enabled or Disabled.
Set this option to ON to turn the Num Lock key On at system boot. The set-
tings are ON or OFF. The Optimal and Fail-Safe default settings are ON.
Set this option to Enable to enable AMIBIOS support for a PS/2-type mouse.
139
↑↓:: Sel
nd rd
Boot Device, 3 Boot Device, and 4
PCCP5 Manual V2.3
th
Boot De-