Tunstall Lifeline Digital User Manual page 20

b) Select a function in Programming mode:
• Press and hold the yellow Extra button until the de-
vice announces the number of the menu position you
want to select according to the Local configuration
menu.
For example, the device announces "One" for speak-
er volume, "Two" for LED intensity and "Three" for
Radio test mode.
• Optionally, press the yellow Extra button the number
of times that corresponds to the menu position you
want to select according to the Local configuration
menu.
For example, press once to select speaker volume,
press twice to select LED intensity or press three times
to select Radio test mode.
c) Select a radio sensor position in Programming mode:
• Press and hold the red Alarm button until the device
announces "Auto pairing mode" or the number of the
radio position you want to select according to the Lo-
cal configuration menu.
• Optionally, press the red Alarm button the number of
times that corresponds to the radio position you want
to select according to the Local configuration menu.
d) Press the green Cancel button to exit programming
mode.
Menu position Announcement
Yellow Extra button
1 "One"
2 "Two"
3 "Three"
4 "Four"
5 "Five"
1 "One"
2 "Two"
3 "Three"
4 "Four"
8 "Eight"
Red Alarm button
1 "One"
2 "Two"
3 "Three"
4-64 "Four" - " Sixty-
four"
Green Cancel button
a
If speech messages are disabled, beeps replace the announcements. For example, the device emits one beep for speaker volume, two beeps for
LED intensity and three beeps for radio test mode.
a
Description
Adjust speaker volume
Adjust LED intensity
Radio test mode
Test cellular signal
strength
Cellular status
Error code (default)
Check SIM card status
Check cellular network
status
Check cellular radio tech-
nology
Nexa/actuator pairing
mode
Radio sensor position 1
Radio sensor position 2
Radio sensor position 3
Radio sensor position
4-64
Go back / Exit
21