Hardware Installation
The COMM+232.PCI can be installed in any of the PCI expansion slots and contains several jumper straps
for each port that must be set for proper operation.
1. Turn off PC power. Disconnect the power cord.
2. Remove the PC case cover.
3. Locate an available PCI slot and remove the blank metal slot cover.
4. Gently insert the COMM+232.PCI into the slot. Make sure that the adapter is seated properly.
5. Replace the screw.
6. Replace the cover.
7. Connect the power cord.
Installation is complete.
© Sealevel Systems, Inc.
7202 Manual | SL9059 7/2021
9