Table of Contents
Advertisement
Hardware Installation
Do not install the PCI Express board until the software has been successfully installed.
Once you have installed the software, install the 7802ec into an available PCI Express slot and boot the
computer. The drivers that were installed during the software installation process will automatically be
used to configure the adapter.
Once the hardware installation completes, you may need to restart the computer to finalize the
installation process.
Verifying Installation
To confirm that the serial port has been successfully installed, look in Device Manager under 'Ports (COM
&LPT)' and in parentheses should be a COM number assigned to each port number.
Your system will assign the next available COM number, which will vary by computer (COM11
through COM18 are shown in this example).
© Sealevel Systems, Inc.
7802ec &7802ecS Manual | SL9680 11/2022
12
Advertisement
Table of Contents
