Microtek FileScan 3125c User Manual page 20

5. Click the Show Preview Window and Show Setting Window tabs in the
6. Click the Preview button to perform a preliminary view of the entire image.
7. Go to the "General" panel by clicking the General tab in the Settings
20 FileScan 3125c User's Manual
c) Select a dimension in the Paper Size as your
preview image size.
d) Select a desired resolution in the Resolution
for your image output resolution.
e) If necessary, select "Text Orientation
Recognition" in the Rotate to ensure
the scanned images in a readable
orientation. When it is selected, you
can select the preferred language
used as an identification in the options
menu.
f) If "Auto-crop" & "Auto-deskew" is selected, the scanner automatically
detects the size of the original image, crops the full scan frame to fit the
image, and removes unwanted black borders after the scan, as well as
corrects the distorted image for proper alignment.
Scan Setup interface to display other interfaces which are helpful for your
scanning processing.
When done, a preview image appears in the Preview window.
Do not forget to put the document back on the document feed tray.
window. Specify the settings for your requirements there.
a) If necessary, specify the image
settings for the front or back side of
documents separately by using the
Sides of Material control when Scan
Source is set as "ADF (Duplex)".
b) Select the image type in the
Document Type as your input
image type.
– Select Photo to scan color
prints.
Select Text to scan text.
–