Step 4: Connecting The Scanner; To The Power Adapter; To The Hi-Speed Usb Cable - Microtek FileScan 3125c User Manual

Step 4: Connecting the Scanner

To the Power Adapter

1. Connect the power adapter to the back of the scanner.
2. Plug one end of the power cord into the power adapter, and plug the other
end of the power cord into a wall outlet or other power source.

To the Hi-Speed USB Cable

3. Connect one end of the Hi-Speed USB cable to your computer.
4. Connect the other end of the Hi-Speed USB cable to the scanner's USB port.
5. Turn the power switch at the back
panel of your scanner to "On"; once
the scanner is detected by your
system, the LED (green) will brighten,
and the scanner is ready to scan.
Power switch
FileScan 3125c User's Manual 15