Important Information - Besam PowerSwing Installation Manual

Important I nformation
Important Notice!
To avoid bodily injury, material damage and malfunction of the product,
the instructions contained in this manual must be strictly observed dur-
ing installation, adjustment, repairs and service etc. Only Besam trained
experts should be allowed to carry out these operations.
Radio and Television Reception
This equipment generates and uses radio frequency energy and if not
installed and used properly, that is, in strict accordance with the manufac-
turer's instructions, may cause interference to radio and television recep-
tion. It has been designed to comply with the emission limits in accord-
ance with EN 500811 (US market FCC Part 15) which are designed to
provide reasonable protection against such interference in a residential
installation. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Re-orient the receiving antenna.
Relocate the receiver with respect to the equipment.
Move the receiver away from the equipment.
Plug the receiver into a different outlet so that equipment and receiver are
on different branch circuits.
If necessary, the user should consult the dealer or an experienced radio/
television technician for additional suggestions.
Note!
Instructions, design, specifi cations and illustrations which are contained
in this manual are not binding. Rights reserved for changes without previ-
ous notice.
4 01-18-2001 PowerSwing US23-0922-02
© Copyright 2006 Besam Entrance Solutions. May not be reprinted or reproduced without permission.