Connection Of Control Units - Besam PowerSwing Installation Manual

Electrical Connection
Connection of Control Units CSDA and CSDA-S – Double Doors
For double door operators both operators have to be connected to the main power.
A four-pole cable (not enclosed) has to be connected between TB2 on the CSDA
and TB6 on the CSDA-S.
Note: Two CSDA controls can be used with signal inputs shared!
Main power
Main power
24 10-21-2002 PowerSwing US23-0922-02
© Copyright 2006 Besam Entrance Solutions. May not be reprinted or reproduced without permission.