Part Identifi Cation & Options - Besam PowerSwing Installation Manual

1. Mounting plate 6. Spring tube
2. Motor/pump 7. Cable inlet
3. Valve 8. Main connection
4. Hydraulic unit 9. Control unit, CSDA
5. Drive shaft 10. Extension unit, EXA (option)
8
© Copyright 2006 Besam Entrance Solutions. May not be reprinted or reproduced without permission.
Arm system, PUSH
This arm systems is delivered with drive arm, telescopic part and door fi tting. It is
used if the operator is installed on the wall on the opposite side of the door swing,
and approved for fi re door application.
Arm system, PULL
This arm system is delivered with drive arm, guide shoe and door fi tting.
Arm system, PULL-P
This arm system is delivered with drive arm, guide shoe door fi tting, and panic
break-out.
10-21-2002
Part Identifi cation & Options
11. End plate
12. Programme selector,
PS3A (option)
13. Cover
14. Bearing sleeve
P/N: 173 009 BK (173 883, Hybrid)
P/N: 100 125 BK
P/N: 100 134 BK
15. Cable holder
16. Adapter plate
17. Cover mounting clip
C Center line, drive shaft
L1
C Center line, hinge
L2
PowerSwing US23-0922-02