HOMCOM A90-194 Assembly Instruction Manual page 7

STEP 4
Put the Handlebar (13)into the handlebar holder then put the cover for handle(14) on the handlebar and
Ø8 Flat Washer Sleeve
tighten with (15), 1 X Spring Washers (16) and (17) by T knob (18).
STEP 5
a. Unscrew four Screws (22) pre-fitted on the monitor (21).
b. Fix the monitor (21) on the bracket with 4 x Screws (22) by the provided Screwdriver (25).
c. Then connect the monitor cable (21-1) and (13-1) link, (11-3) and (21-2) link.
d. Unscrew the two bottle Screws (20) pre-fitted on the handlebar support tube, then fix the Water
Bottle (20) on it with the two bottle Screws (20) by the provided Screwdriver (24).
7