Troubleshooting - HOMCOM A90-194 Assembly Instruction Manual

TROUBLESHOOTING

REF PROBLEM
1 THE PEDALS ARE
SPINNING OUT OF
CONTROL
2 THE BIKE IS UNSTABLE
3 THE HANDLEBARS
ARE WOBBLY
4 MY FEET BARELY
TOUCH
THE PEDALS
5 THE COMPUTER
DOESN'T
RESPOND
SOLUTION
1. ADD MORE RESISTANCE BY TURNING THE TENSION
CONTROL TO THE RIGHT.
2. START PEDALLING SLOWLY.
3. KEEP TURNING THE TENSION CONTROL TO THE RIGHT
UNTIL YOU CAN FEEL RESISTANCE WHEN YOU PEDAL.
1. ADJUST THE FRONT AND BACK STABILIZERS UNTIL THEY
ARE FLAT ON THE SURFACE.
2. SHAKE THE BIKE TO ENSURE IT'S STABLE.
TURN THE HANDLEBAR SAFETY LOCK UNTIL TIGHT (DO THIS
WHILE STANDING).
1. ADJUST THE HEIGHT OF THE SADDLE BY PULLING OUT
THE HEIGHT ADJUSTMENT LOCK.
2. ADJUST THE HEIGHT OF THE BIKE UNTIL THE SADDLE IS
HIP HEIGHT.
3. REPEAT STEP 1 AND STEP 2 UNTIL YOUR FEET
COMFORTABLY SIT INSIDE THE FOOTSTRAPS WITH YOUR
LEGS SLIGHTLY BENT.
1. REMOVE THE COMPUTER FROM THE COMPUTER
BRACKET.
2. CHECK THE BATTERY IS LOADED CORRECTLY.
3. CHECK THE COMPUTER IS RESPONDING.
4. IF NOT, REMOVE THE COMPUTER WIRE AND RE-INSERT IT.
5. CHECK THE CONSOLE IS RESPONDING.
6. IF NOT, TRY REPLACING THE BATTERY.
7. OTHERWISE, CALL THE DISTRIBUTOR FOR MORE
INFORMATION.
11