Introduction To Lasercad V7 Software - LIGHT OBJECT LO-E5 Manual

Introduction to LaserCAD v7 Software

Introduction:
This system controls the laser CNC machine by computer and
completes machining tasks according to different settings from the
user. The system consists of a control system, control panel and
compatible software. This manual is an introduction on how to use
the software to complete machining tasks.
Composition
The control system consists of hardware (control card) and
software. Hardware includes one motion control card, one LCD
Panel, four connection cables, and laser control software. Control
system software( three versions: General Version (LaserCAD) ,
CorelDraw based version, AutoCAD based version) and instruction
manual are in the CD within the packaging box
Operating System Requirements
⑴ Windows 2000, XP,Vista, Windows 7, 8, & 10)
⑵ Celeron 2.1Ghz or higher.
⑶ Minimum of 1Gb is suggested.
Installation
• Find and open LaserCAD_V7.78B folder
• Double click on "Setup" and click the "Install" button
• After the installation is complete, click the "Install USB driver"
button as well.
• Once that is completed, the message "FTDI CDM Drivers have
been successfully installed" should appear.
• Your installation is now complete
6