USB Connection Mode
To connect your computer to the laser machine, be sure that the USB-PC is plugged in first. Then on the right side of
LaserCAD, press "Select Mode"
The window above will appear. Then, click the "Add" button
In this next window, you can change the device name and press "FindCom" to find the laser machine. After that is
done, press ok and your computer is connected to the laser.
For the USB connection mode to work, the USB Driver has to be
installed. This can be found in the setup when installing
LaserCAD.
28
Need help?
Do you have a question about the LO-E5 and is the answer not in the manual?