1. UDisk Files:
documents that were imported from the
USB or computer that were saved on
the machine.
2.Axes Control:
The setting that resets the Z-axis and U-axis.
3.Common Params:
Jog(mm): increments with each push
FocusDis: the distance between the
laser and cutting material.
4.Work Mode:
Origin: the location that the laser will return
back to.
Z Autofocus
To Reset Z axis
Jog (mm)
FocusDis:
Origin:
4
Need help?
Do you have a question about the LO-E5 and is the answer not in the manual?