Object Color, Object Transforming, Object Mirror, And Object Tilting - LIGHT OBJECT LO-E5 Manual

Object color: allows users to click on any color in the layer bar to change object color. This makes it easier for
those who want to cut/engrave only certain parts of an image.
Object Transforming: is the operations to change the object's position, direction, size and such, and will not
change the shape of the object and its character.
Mirror: Mirror means flipping objects horizontally or vertically by clicking
To flip the object vertically, click the
Tilting and rotating objects is very simple.
◆
Rotating Objects: there are 2 ways to rotate the object:
1. Click , and input rotate angle in
2. Click , and double click objects needed tilting or rotating, then get into rotating/tilting editing mode.
At this mode, control points around objects changes to rotation control arrow
arrow shown as below
◆
Tilting Objects: Operation is the same as rotation.
button.
，then click to complete rotation.
Move mouse to control arrow, and move control point along arrow
direction; during movement, profile line generates and rotate as
below: Release mouse when rotating to correct position, then
rotation is complete.
, will flip object horizontally.
and tilting control
20